Print This Page

Enlarge Picture

Model SMC-3 Microprocessor Controlled Toroidal Winding Machine with RS-232 for Downloading from PC Full programmability of all winding functions now available in a floor stand machine. Forget about lengthy set-up times. The famous SMC control now allows all winding functions to be programmed for ease of repeatable recall at any time. The SMC-3 is a medium sized floor stand machine for the winding of medium to large size toroidal coils. The ability to accept 4 types of winding heads along with 3 sizes of taping heads makes this machine the most versatile in its class. Core sizes from 3.0 inch (76.2mm) to 17.0 inch (431.3mm). Wire sizes from #38 awg (0.1mm) to #7 awg (3.66mm).

Specification / Capabilities Maximum wire size#7 AWG (3.66 mm) Minimum wire size #38 AWG (0.1 mm) Maximum coil O.D. 17.0" (431.3 mm) Minimum coil O.D. 3.0" (76.2 mm) Minimum coil I.D. 0.5" (12.7 mm) Maximum coil height 7.0" (177.6 mm) Maximum Coil weight 80 lbd (36.4 kg) Winding speeds Variable depending on head Wire spacing Programmable variable Segment Winding Programmable Progressive Winding Programmable with controller Deceleration Control Programmable with controller Acceleration Control Programmable with controller Shuttle Head Motor 1 HP - 1750 RPM-DC Core Rotation Motor Hybrid step motor Power requirement 120 Volt or 220 volt (50-60 cycles) Crated dimensions 48" x 48" x 60" (121.4 x 121.4 x 151.8 cm) Crated weight 750 lbs (340 kg)

Principal and Optional Features Separate speed controls for loading and winding Programmable stepper motor driven core rotation in either direction with minimum backlash Programmable wire spacing, from coarse to fine micro-step resolution Electronic linear pick-up for loading (feet or meters) Tape head controls Solid-state microprocessor count controller - total of 99 programmable presets - LED readout - built-in fiber optic turns sensor-program storage- production batch counter - utmost accuracy, stability and reliability RS-232 with interface software Quick change winding and taping heads Automatic core index function Push button, on-off footswitch or variable footpedal operation Optional SMC programming software to pre-calculate and download all winding parameters from your PC to the machine

16" Gear Head 12" Gear Head 9" Gear Head 14" Tape Head 9" Tape Head 9" SI Tape Head This free script provided by JavaScript Kit

See the rest of the SMC line-up:   SMC-1   SMC-2   SMC-4       See also the optional Software for this machine.